1 tubular industrial process tank immersion heaters general purpose tank or reservoir water comes complete with cord set and 3-wire grounding plug. ordering example: tat40017, 6000 watts immersion heater, 240 vac. l immersion section of heater made of 316 stainless steel l cold riser extends to the top of container where control housing is located l cord set with 3-wire grounding plug is included for easy installation and wiring l adjustable vapor-proof thermostat control with temperature range of 13 to 46oc (55 to 115f) (3) l hi-limit cut switch set to 52oc (125f) (4) l stainless steel mounting bracket also supplied for easy mounting l pilot light and on-off switch provided tat400 series hi-limit if the thermostat should fail and its contacts stick in a closed position, the heating element will continue to heat to about 52oc (125f). at this temperature the hi-limit will open and turn the heating element off. after repairing or replacing the thermostat the hi-limit can be manually reset. caution: hazard of electric shock. installation must be grounded to earth and heater connected to line input through properly sized gfci circuit breaker. disconnect power to heater before servicing. there should be no body contact with the water while the heater is in the water. under no circumstances should this heater be turned on unless the system is full of water. a 1??" b 1?? " 178 (7) heated signal light hi-limit 52oc (125of) thermostat 13 to 46oc (55 to 1 15of) g plug (nema 5 to 15p)120v plug (nema 6 to 30p)240v heating element 120v1.44 kw 240v6 kw wiring diagram internal electrical connections to order visit omega.com/tat400_series for pricing and details model no. 1.2 m (4) cord 1.8 m (6') cord sheath watt density watt/in 2 watts volts mm inch mm inch tat40012 TAT40016 tat40017 tat40013 316 stainless (bright annealed) 51 13 6000 1440 240 120 1010 39.75 445 17.5 dimensions: mm (inch) a b to order, call 1-800-826-6342 or shop online at omega.com sm
|
